Nous sommes des spécialistes de la séparation magnétique

Nous développons, fabriquons et installons des équipements permettant de réaliser une séparation magnétique. Nous concevons et fabriquons nos séparateurs magnétiques sur mesures afin qu’ils répondent exactement à vos besoins.

Vente de machines-outils d'occasion

Devez-vous réduire les coûts? Vous n'êtes pas un client exigeant et êtes-vous satisfait du séparateur magnétique utilisé, mais entièrement fonctionnel? Nous avons donc ces séparateurs magnétiques utilisés pour vous.

Motor and gearbox recycling line

After being crushed the material mix enters through a vibrating feeder into a heated booth for manual sorting (e.g. cables, cupper). The material then continues oustside on the conveyor where an overband magnet separates the ferrous metals from the mix, while non-ferrous metals drop into a box.

The line consists of these components

  • Motor and gearbox Lefort (output: 8-10 tons per hour, manufactured in 1994)
  • Vibrating feeder
  • Conveyor belt
  • Heated booth for manual sorting
  • Overband magnet for ferrous metal separation

Price

79.800 EUR ( without VAT)

Electromagnetic separator over conveyor DND-AC E2

These powerful electromagnetic separators excel at high power and the deep magnetic field. Thanks to this, they can be used for separating metals from a higher layer of separated material.

The magnet is designed for installing above the conveyor with a belt width of 800 mm.

The suspended electromagnet is supplied including the control box, as a complete device.

The magnet undergoes thorough tests - have a look at the table showing the capturing capabilities of individual test measurement standards and measuring the magnetic induction at different distances from the magnet.

Price

EUR 11.999

Parameters

  • Max. conveyor belt width: 1300 mm
  • Max. recommended installation height: 400 mm
  • Magnet power supply: 6.5 kW
  • Magnetic induction: 5,000 G (on the coil)
  • Total length: 2,510 mm
  • Total height: 612 mm
  • Total width: 1,770 mm
  • Conveyor belt width: 1,230 mm
  • Belt speed: 2,2 m/s
  • Belt type: rubber, with noses
  • Degree of electrical protection: IP55
  • Drive: Nord, 400/690 V, 50 Hz, 3 kW
  • Control: control box - included in the price
  • Working cycle: 100%. 24 hrs / day
  • Dimensions: see the drawing
  • Weight: 3,320 kg

Download


 

Nahoru